Home / Tanks / Reverse Osmosis Storage Tanks / PAE RO-152 Reverse Osmosis Water Storage Tank Powder Coated Steel 5.5 Gallon - OPEN BOX
PA-E

PAE RO-152 Reverse Osmosis Water Storage Tank Powder Coated Steel 5.5 Gallon - OPEN BOX

Part Number: ROT-5.5-OB
Alt. Part Number: ROT-5.5, TK-PRO-6W, RO-152
Product image 1
Product image 2
Product image 3
Product image 4
Product image 5
Product image 6
Your price:
similar items
Consumer Note: All Tanks were set to Factory standard pressure for testing. Through the conducted test, no pressure was lost and no leaks were detected. This tank maintains full functionality with only exterior blemishes. This is a deal you cannot pass up! This item is selling As Is, no returns will be accepted.
 
 The PAE RO-152 is built with FDA approved materials. The water storage chamber features a virgin polypropylene liner, high-grade chlorobutyl diaphragm and stainless steel 1/4" MPT water connection. The diaphragm is post cured to ensure that your water is tasteless, odorless and contaminant free. The tank is built with a sealed brass air valve and o-ring sealed cap to ensure a leak-free air chamber.

Features:
  • Stainless steel water connection
    •
  • High-grade chlorobutyl diaphragm
    •
  • Virgin polypropylene liner
    •
  • Two part epoxy primer, polyurethane paint finish
    •
  • Plastic tank stand included
    •
  • NSF-58 and CE approved
    •
  • Made in Taiwan
    •  Reverse Osmosis Tank Maintenance and Accessories:

    A tank shut-off valve is necessary to connect the tank to your reverse osmosis system and control the flow of water into and out of the tank. The valve is also essential for performing system service or maintenance. If your RO system uses 1/4" OD tubing to connect to the tank, select the LFPP4VFE4
    valve. If your system uses 3/8" OD tubing select the PP6VFE4-MG
    valve.
    For optimal performance, it is necessary to keep a pre-charge of approximately 7 psi in your tank. Most automotive tire pressure gauges either do not read below 10 psi, or are not very accurate at pressures this low. 54846 Tank Pressure Gauge
    reads pressures between 0 and 20 psi, making it perfect for RO tank maintenance.
    The RO tank should be sanitized before initial use and during every filter change. The Reverse Osmosis Sanitizing Maintenance Kit features Sani-System, an EPA & NSF certified sanitizer, making it a great alternative to using chlorine bleach. The kit also includes a syringe for application of the sanitizer.


    California residents Prop 65 Warning
    WARNING!
    This product contains materials known to the State of California to cause cancer and birth defects or other reproductive harm. www.p65warnings.ca.gov
    optional parts
    required parts
    similar items