Home / Tubing & Hoses / Tubing & Hoses Accessories / JACO P-P-6 Polypropylene Tube Insert For 1/4" CTS (3/8" OD)
JACO Manufacturing Company

JACO P-P-6 Polypropylene Tube Insert For 1/4" CTS (3/8" OD)

Part Number: P-P-6
Product image 1
Product image 2
Product image 3
Product image 4
Your price:
Choose
Single
100-Pack
similar items
Jaco P-P-6 Polypropylene Tube Insert Fittings are used in soft or thin wall tubing. The inserts will not wear a hole in the tubing, and provide a grip to prevent sliding due to heat expansion. Polypropylene inserts eliminate the need for special high temperature inserts.

Specification:
  • Tubing Size: 3/8" OD
  • Inner Diameter of Fitting: 0.2"
  • Length of Fitting: 1/2"
NOTE:All Measurements listed above are in Inches

Advantages of JACO fittings over metal compression fittings:
  • Good electrical insulating qualities. This eliminates the electrolytic action that corrodes tubing, caused by a dissimilar metal meeting a fitting.
  • Low density and softness of plastic gives JACO fittings the ability to absorb mechanical and acoustical vibrations.
  • Low resistance to flow due to the smooth internal surface of the fittings.
  • Resistance to scale buildup.


Jaco Part
Numbers 		Tube Size
(O.D.) 		A B C D E
 P-P-4  1/4  3/8 .240 - .250  .199  1/8  .167
P-P-5  5/16  13/32  .300 - .312   .217 9/64 .180 
P-P-6  3/8  1/2 .360 - .370  .245 - .250  .200  .235
P-P-8  1/2  9/16 .475 - .490  .370 - .375  .300  .350
All Measurements listed above are in Inches
California residents Prop 65 Warning
WARNING!
This product contains materials known to the State of California to cause cancer and birth defects or other reproductive harm. www.p65warnings.ca.gov
similar items