Neo-Pure MB-25292-05 29-1/4" Polypropylene Sediment Depth Filter 5 mic

Neo-Pure MB-25292-05 is a High Efficiency 29-1/4" Polypropylene Sediment Depth Filter, which is a reliable and economical solution for pre-filtration in many applications. The 29-1/4" sediment depth filter, like FCRO cartridges, offer greater surface area for longer life and greater dirt holding capacity. Neo-Pure MB-25292-05 filters are listed for food contact applications in Title 21 of the U.S. Code of Federal Regulations.

Features:

Long filter life
100% pure polypropylene
Exceptional dirt-holding capacity
FDA approved materials
Fits in most water filter housings that use 30" x 2.5" filters
Tested and certified by NSF to NSF/ANSI Standard 42

Applications:

Aqueous Solutions
Component Wash Fluids
Coolants
Cutting Fluids
Fuels
Light Oil
Lubricants
Mineral and Synthetic Oils
Solvents
Water
Water Glycols

California residents Prop 65 Warning

WARNING!

This product contains materials known to the State of California to cause cancer and birth defects or other reproductive harm. www.p65warnings.ca.gov

Product Details
Efficiency	.8
Initial Pressure Drop	< 1 psi typical PSI Differential
Max Temp (°F)	150
Micron Rating (Nominal)	5 µm
Min Temp (°F)	40
Psid@Flow Rate	< 1 psi typical
Cap Material	Polypropylene
Cartridge Style	Drop-in
Contaminants Reduced	Sediment/Dirt/Rust
Diameter	2-1/2"
End Cap Type	Double Open Ended (DOE) - No Cap
Filter Construction	Melt Blown
Filter Type	Sediment Depth
Media Type	Polypropylene
Micron Rating	5 µm
Warranty & Certifications
Product Certification Standard	NSF/ANSI 42, FDA CFR-21
Product Weight & Dimensions
Product Length	30"
Product Weight (lbs)	0.9

Product Details
Efficiency	.8
Initial Pressure Drop	< 1 psi typical PSI Differential
Max Temp (°F)	150
Micron Rating (Nominal)	5 µm
Min Temp (°F)	40
Psid@Flow Rate	< 1 psi typical
Cap Material	Polypropylene
Cartridge Style	Drop-in
Contaminants Reduced	Sediment/Dirt/Rust
Diameter	2-1/2"
End Cap Type	Double Open Ended (DOE) - No Cap
Filter Construction	Melt Blown
Filter Type	Sediment Depth
Media Type	Polypropylene
Micron Rating	5 µm
Warranty & Certifications
Product Certification Standard	NSF/ANSI 42, FDA CFR-21
Product Weight & Dimensions
Product Length	30"
Product Weight (lbs)	18

Product Details
Efficiency	.8
Initial Pressure Drop	< 1 psi typical PSI Differential
Max Temp (°F)	150
Micron Rating (Nominal)	5 µm
Min Temp (°F)	40
Psid@Flow Rate	< 1 psi typical
Cap Material	Polypropylene
Cartridge Style	Drop-in
Contaminants Reduced	Sediment/Dirt/Rust
Diameter	2-1/2"
End Cap Type	Double Open Ended (DOE) - No Cap
Filter Construction	Melt Blown
Filter Type	Sediment Depth
Media Type	Polypropylene
Micron Rating	5 µm
Warranty & Certifications
Product Certification Standard	NSF/ANSI 42, FDA CFR-21
Product Weight & Dimensions
Product Length	30"
Product Weight (lbs)	900